Barcode Scanner - CCD Camera (Arduino & Raspberry Pi Compatible)
$68.99
✅SHIPS TODAY
TTL or USB Barcode Scanner that works with Arduino, Raspberry Pi and all other microcontrollers that support TTL serial or USB.
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
Features:
- Embed a barcode scanner into your IoT projects
- 1D CCD Camera Barcode Reader/Scanner Module
- Barcode Scanner for Arduino & Raspberry Pi projects
- Interface Options: (select above)
- RS232 TTL Serial
- USB
- Provides Long Distance and High Speed Scanning in a tiny 1 inch x 1 inch x 1/5 inch package
- Horizontal Scanning Angle Range: 72 degrees
- Vertical Scanning Angle Range: 82 degrees
- Rotational Scanning Angle Range: 360 degrees
- Scanning Speed: 250 scans per second
- 1200dpi
- Automatic sensing mode, continuous scanning and manual trigger scanning modes
- Supported barcode types: EAN-8, EAN-13, UPC-A, UPC-E, Code 39, Code 93, Code 128, EAN128, Codebar, Industrial 2 of 5, Interleave 2 of 5, Matrix 2 of 5, MSI, etc.
- Onboard 675nm Infrared LEDs
- Decode Accuracy: 4 mil
- Can Read off Paper, Film and Screens
- Rugged: tested to endure 5.9 foot drops to concrete 5 times
- Superior reading ability can even handle folded, coated, dirty, reflective, damaged and fuzzy barcodes
- Dimensions: 1" x 0.95" x 0.2" (26x24x5mm)
|
PIN # |
Signal Name |
I/O |
Instruction |
|
1 |
BOOT0 |
Input |
Low level FLASH to startup |
|
2 |
VDD |
- |
5V Input |
|
3 |
GND |
- |
GND |
|
4 |
RX |
Input |
TTL-232 Input |
|
5 |
TX |
Output |
TTL-232 Output |
|
6 |
USB_D- |
Input/Output |
USB_D-Singal |
|
7 |
USB_D+ |
Input/Output |
USB_D+ Singal |
|
8 |
NG |
- |
Null |
|
9 |
Buzz |
Output |
|
|
10 |
LED |
Input |
|
|
11 |
NG |
- |
Null |
| 12 | nTrig | Input | Trigger Input Signal , Keep low level 10ms input can trigger the scan button. |
Arduino Library: https://github.com/serovsergey/e1007
Raspberry Pi Reference: https://www.rtscan.net/raspberry-pi-barcode-scanner/
For Raspberry Pi users who are not looking to save space, we recommend this USB Barcode Scanner which does not require much setup and plugs into a USB port instead of the GPIO like the TTL model here.
TA1288T
1 Item
Comments (0)
No customer reviews for the moment.
Viewed products
16 other products in the same category:
TTL or USB Barcode Scanner that works with Arduino, Raspberry Pi and all other microcontrollers that support TTL serial or USB.