USB AVR Programmer

This USB AVR programmer is a 10 pin USB in-circuit programmer for Atmel AVR microcontroller chips such as the ATtiny85. Based on the ATMega88, this programmer uses a firmware-only USB driver so no special USB controller is needed! Just plug this programmer into your computer's USB port and hook up to the chip you want to program.

• Read or write to your microcontroller
• Allows you to edit the microcontroller's:
  • EEPROM
  • Firmware
  • Fuse bits and Lock bits
• Support for Windows, MAC OS X and Linux
• 5KB/s maximum write speed
• Software controlled SCK option to support chips with low clock speeds (< 1.5MHz)
• Standard ICSP 10-pin pinout
• Power and Programming Indicator LEDs onboard
• Over-current protection
• Supports both 5V and 3V logic
• Capable of programming the following chips:
  • AT89S51
  • AT89S52
  • AT89S53
  • AT89S8252
  • ATTiny12(L)
  • ATTiny13(V)
  • ATTiny15(L)
  • ATTiny24(V)
  • ATTiny25(V)
  • ATTiny26(L)
  • ATTiny2313(V)
  • ATTiny44(V)
  • ATTiny45(V)
  • ATTiny84(V)
  • ATTiny85(V)
  • AT90S2313(L)
  • AT90S2323(L)
  • AT90S2343(L)
  • AT90S1200(L)
  • AT90S8515(L)
  • AT90S8535(L)
  • ATMEGA48(V)
  • ATMEGA8(L)
  • ATMEGA88(V)
  • ATMEGA8515(L)
  • ATMEGA8535(L)
  • ATMEGA16(L)
  • ATMEGA162(V)
  • ATMEGA163(L)
  • ATMEGA164(V)
  • ATMEGA165(V)
  • ATMEGA168(V)
  • ATMEGA169(V)
  • ATMEGA169P(V)
  • ATMEGA32(L)
  • ATMEGA324(V)
  • ATMEGA325(V)
  • ATMEGA3250(V)
  • ATMEGA329(V)
  • ATMEGA3290(V)
  • ATMEGA64(L)
  • ATMEGA640(V)
  • ATMEGA644(V)
  • ATMEGA645(V)
  • ATMEGA6450(V)
  • ATMEGA649(V)
  • ATMEGA6490(V)
  • ATMEGA128(L)
  • ATMEGA1280(V)
  • ATMEGA1281(V)
  • ATMEGA2560(V)
  • ATMEGA2561(V)
  • AT90CAN32
  • AT90CAN64
  • AT90CAN128
  • AT90PWM2(B)
  • AT90PWM3(B)
  • & more