Optical to RCA Converter Box

Professional digital to analog audio converter that converts optical or coaxial digital audio signals to RCA analog audio output. It can accept digital audio signals from smart TVs, Blu-ray DVDs, and other devices, and can perfectly convert to RCA analog stereo output to amplifiers, stereos, and other devices.

Features:

• Converts Digital to Analog Signals
• Convert digital signal to analog L/R signal using coaxial or Toslink cable
• Supports sampling rate at 32, 44.1, 48, and 96 KHz
• 24-bit S/PDIF incoming bit stream on left and right channels
• No electromagnetic noise transmission
• Easy to install and easy to use
• Input interface: Toslink interface x 1 , Coaxial interface x 1
• Output interface: RCA interface x 1
• Support the sampling rate 32 KHz, 44.1 KHz, 48 KHz and 96 KHz
• Dimensions: 52 x 42 x 26 mm ( L x W x H ）
• Weight (net weight for the converter): 68g
• Power supply voltage: 5VDC

Usage Instructions:

• Plug in the optical audio cable on one end. Note: make sure it is plugged in the right direction. If it feels loose, it means that it is connected wrong. Turn it 180 degrees and then insert again.
• Connect to the speaker or amplifier using the right interface.
• Set your TV, DVD player, cable box, etc to the right mode: optical digital audio output.
• Note: You can convert optical fiber optic or coaxial inputs. Both input types are supported but they cannot be used simultaneously.
• This item is not suitable for Dolby or 5.1 CH audio.
• Please set the audio output to PCM mode when connected to a TV.